Frequently Asked Questions

1. Do you install your product?
2. Can you recommend an installer?
3. Does your company supply installation instructions and support?
4. How is your material attached to the building?
5. Does your product need to be painted?
6. Do you supply shop drawings?
7. Do you supply engineering calculations?
8. Do your shop drawings show blocking required?
9. Do you offer design recommendations?
10. What is the typical length of cornice parts?
11. How does your product come packaged?
12. Does your company have any onsite storage?
13. What is the thickness of material?
14. Are your corners on a cornice prefabricated?
15. What type textures are available for FRP?
16. What colors are available with FRP?
17. How do you handle colors?
18. How do I obtain a catalog?
19. How do I obtain sample material? Do you charge for it?
20. Do you manufacture frp?
21. Which manufacturers do you work with?
22. Do you have a showroom?
23. Can I view some of your products online?
24. How do I obtain installation instructions?
25. Do you have an online order form?
26. How quickly can I get pricing?
27. Do you have a toll free number?
28. Do you accept credit card payments?

1. Do you install your product?
   No
   
2. Can you recommend an installer?
   Sometimes if there is one in the area or one willing to travel we can make a recommendation. Please contact sales for that information.
   
3. Does your company supply installation instructions and support?
   Yes
   
4. How is your material attached to the building?
   You attach our material by using blocking that is supplied by others. The installer drills through the face of the material and counter sinks screws 16” O.C. Fibertech supplies a Fiberglass Repair Kit for the installer to repair the holes caused by the screws. This process is similar to patching sheetrock.
   
5. Does your product need to be painted?
   Fibertech recommends that all columns be painted in field after installation. Other FRP material does not have to be painted. Dark or metallic colors will have to painted either by Fibertech or an installer (Fibertech recommends installer).
   
6. Do you supply shop drawings?
   Yes
   
7. Do you supply engineering calculations?
   No. If required, an engineer in the state of the project would have to perform calculations. This cost is covered by the customer.
   
8. Do your shop drawings show blocking required?
   Yes
   
9. Do you offer design recommendations?
   Yes
   
10. What is the typical length of cornice parts?
    8 to 12 feet in length
    
11. How does your product come packaged?
    Each individual piece is wrapped and numbered with part numbers that coincide with the shop drawings. Each piece is then loaded on to a truck piece by piece (no bulk packaging or pallets). The customer is responsible for unloading each piece at the job site.
    
12. Does your company have any onsite storage?
    No, we make our material to ship. Any storage beyond staging of parts is the customer’s responsibility.
    
13. What is the thickness of material?
    3/16” nominal thickness with minimum of ¼” at the attachment points on shop drawings.
    
14. Are your corners on a cornice prefabricated?
    Yes
    
15. What type textures are available for FRP?
    Our most common texture is smooth matte texture. Sprayed on textures are available at an additional cost.
    
16. What colors are available with FRP?
    Fibertech can offer a wide range of colors. However we are not able to produce dark colors or metallic colors without painting the product. Please contact sales to find out how to handle the coloring of your project.
    
17. How do you handle colors?
    Fibertech has standard colors that we use regularly. We also can custom match colors through our gel coat manufacturers as long as it is in Fibertech’s standard range of colors. Otherwise the project will need to be painted.
    
18. How do I obtain a catalog?
    Email or call (864) 646-3000.
    
19. How do I obtain sample material? Do you charge for it?
    Contact sales for free samples.
    
20. Do you manufacture frp?
    Yes
    
21. Which manufacturers do you work with?
    When we don’t manufacture the product ourselves, we use Fypon Molded Millwork and Dixie Pacific as our primary suppliers.
    
22. Do you have a showroom?
    No
    
23. Can I view some of your products online?
    Yes
    
24. How do I obtain installation instructions?
    Download them from our website or ask a member of our sales team.
    
25. Do you have an online order form?
    Not at this time.
    
26. How quickly can I get pricing?
    It depends on the scope of your project. Pricing is usually available the same day.
    
27. Do you have a toll free number?
    No.
    
28. Do you accept credit card payments?
    We currently accept Visa and Mastercard payments.